Home » Posts tagged 'boiler replacement'

Tag Archives: boiler replacement

The Benefits of Boiler Servicing

When you book a boiler service, a Gas Safe registered heating engineer will carry out several checks. They will begin with a visual inspection, checking for damage and wear.

Boiler Servicing

They will then remove the boiler casing and check internal components such as the heat exchanger and burner. They will also check the flue for safety and emissions. Keep reading the article below to learn more about Boiler Servicing.

Boilers are complex machines, and even though today’s boilers are more efficient, more reliable, and safer than ever before, they can still become dangerous if not operated correctly. That’s why it is important to keep up with proper maintenance, operator training, and emergency procedures to avoid safety issues.

A boiler’s gas supply must be carefully regulated to avoid overflowing and possible explosions. In addition, a boiler’s water treatment program must be kept up to date to prevent corrosion and scale accumulation. The resulting build-up can weaken the structure of the boiler, which may eventually lead to its failure.

The most common cause of boilers not operating properly is due to poor maintenance practices. It is essential that all employees have access to a robust and practical boiler safety program, which should encompass everything from employee training to emergency procedures. These programs can help ensure that all boilers operate safely and efficiently, minimizing the risk of accidents and ensuring that the machines last longer than they otherwise would.

Safety measures are often very simple. For example, a professional service technician will always wear a protective suit and use tools with great care. This helps them avoid getting cut or scalded while working on the boiler. It is also a good idea to periodically check the flue pipe for blockages and damage.

Another easy thing to do is to regularly inspect the burner for signs of damage and clogging. This can be done through a sight port and is vital to the safe operation of the boiler. It is also important to inspect the various venting and drainage systems.

Lastly, all boilers should be equipped with a flame safeguard system that is wired to a burner controller. This will shut off the fuel supply if it cannot detect a flame in the boiler. The burner and flame safeguard systems should be tested on a regular basis to make sure they are functioning properly.

In addition to these safety measures, all employees should be trained in hazard communication and aware of the risks associated with boilers. It is also a good idea to have a lockout/tagout procedure in place for all energized equipment, not just boilers. This can prevent accidental startup and take the option to start up unsafe machinery out of the hands of unauthorized workers.


As mentioned earlier, a boiler that’s well-maintained and serviced will work more efficiently, reducing its fuel usage. This in turn reduces your energy bills.

Many issues with a boiler can be caught and dealt with during a servicing visit, so the unit will work better for longer. If left unchecked, these small problems may develop into larger ones that require a full repair and a much higher bill. Servicing nips these issues in the bud, which means fewer breakdowns when you need the heat most (typically during winter).

Another way that boiler servicing helps to increase efficiency is by reducing losses in the system. This includes heat loss through the flue gas, water vapor loss, and unburned carbon in the residue. The flue gas loss is directly related to boiler design and not the combustor technology, while the water-from-fuel and unburned carbon losses are related to how complete combustion is.

The stack temperature, which is a measure of the heat carried away by the flue gases, is also important for efficiency calculations. But this value must be proven to be accurate and reflective of the equipment’s actual fuel usage. Choosing a boiler with a high-pressure drop design, quality fan and damper designs, and simple linkage assemblies will ensure repeatable air-to-fuel ratios year in and year out.

Emissions reduction: Effective maintenance of boilers helps facilities meet and exceed environmental compliance regulations. This contributes to cleaner air, reduced greenhouse gas emissions, and less reliance on fossil fuels.

A safer working environment: Regular boiler maintenance helps to minimise safety risks and potential liability issues. In the event that an issue does arise, a service engineer will be able to identify and rectify it immediately.

Lower repair costs: By identifying issues and addressing them before they escalate, boiler servicing can significantly reduce the cost of boiler repairs. This is particularly true for critical failures, which can be very expensive to fix if not addressed immediately. In addition, a preventive approach will typically result in fewer callouts from the engineer during the lifetime of the boiler. This reduces downtime, increases production, and ultimately decreases overall repair costs.


If you use oil heat, it is important to have your boiler serviced annually. This will ensure that the system is firing safely and cleanly, and that it is running at its optimal level. An engineer can change the oil filter, check the pump pressure and nozzle, and adjust the air/band settings to help ensure that your boiler is working as efficiently as possible. They can also test the low water cut off (LWCO) to make sure that it is functioning correctly.

Another measure that an engineer will take during a boiler service is to drain down the system. This will flush out any debris that has built up over time and could be causing blockages or affecting the efficiency of the boiler. This is an important step that should be done regularly, as it will prolong the life of your heating system and save you money on energy bills in the long run.

The engineer will also carry out a series of other checks during a boiler service that could also help to improve its performance and extend its lifespan. They will check the electrical connections, ensure that it is vented properly, and remove the casing to look inside to make sure everything is as it should be. They will also check the thermostat and controls, as well as ensuring that all combustion seals are intact.

Regular boiler servicing may seem like an unnecessary expense, but it is a vital investment in the longevity of your heating system. It will ensure that your system is operating at optimum efficiency and that minor problems are caught before they escalate into costly repairs. It will also extend its lifespan and could even lead to a warranty extension, saving you even more in the long run.

If you do not have a maintenance contract for your boiler, we recommend that you arrange a service as soon as possible to avoid any future breakdowns and expensive repairs. We recommend booking in summer rather than winter, as engineers tend to be busier during the colder months.

Peace of Mind

Having a boiler that works reliably is a great feeling. This sense of security is enhanced by getting a regular boiler service, which helps identify minor issues and prevent them from worsening. It also optimizes the system’s energy efficiency and extends its lifespan.

Whether you have gas, oil, or electric boilers, they all need servicing to ensure the proper functioning of the heating system. A faulty boiler can pose serious health risks, particularly carbon monoxide poisoning. This odourless and colourless gas is often undetected, making it hard to know whether your home is safe. Regular boiler servicing helps detect potential carbon monoxide leaks, preventing them from causing major damage.

Another benefit of getting a regular boiler service is that it can help you save money. This is because a skilled engineer can spot small problems that could cause your energy bills to spike, saving you from paying expensive repair bills in the future. A reputable company will follow manufacturer guidelines for maintenance, and their technicians will be up-to-date with industry best practices.

Boiler servicing also saves you money in the long run by extending your boiler’s lifespan and improving its efficiency. Moreover, it allows you to save on heating costs by keeping your house comfortable throughout the year.

In short, a boiler service is an investment that can protect you against unexpected breakdowns and costly repairs, as well as reduce your energy bills and increase safety. It is important to look for a reputable company with clear quotes and solid service agreements.

A reputable company will have Gas Safe registered engineers who are familiar with the latest industry standards and are experienced in a wide range of heating systems. The perks of choosing a reputable company include customer loyalty discounts and priority service. It is also helpful to read online reviews and ask friends and family for recommendations.